Menu Guide
Table Of Contents
- Table of Contents
- Menu Guide
- Defaults
- The Playback Menu: Managing Images
- The Photo Shooting Menu: Shooting Options
- Photo Shooting Menu Bank
- Extended Photo Menu Banks
- Storage Folder
- File Naming
- Role Played by Card in Slot 2
- Flash Control
- Image Area
- Image Quality
- Image Size
- NEF (RAW) Recording
- ISO Sensitivity Settings
- White Balance
- Set Picture Control
- Manage Picture Control
- Color Space
- Active D-Lighting
- Long Exposure NR (Long Exposure Noise Reduction)
- High ISO NR
- Vignette Control
- Auto Distortion Control
- Auto Bracketing Set
- Multiple Exposure
- HDR (High Dynamic Range)
- Interval Timer Shooting
- Silent Live View Photography
- The Movie Shooting Menu: Movie Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- a1: AF-C Priority Selection
- a2: AF-S Priority Selection
- a3: Focus Tracking with Lock-On
- a4: 3D-Tracking Face-detection
- a5: 3D-Tracking Watch Area
- a6: Number of Focus Points
- a7: Store by Orientation
- a8: AF Activation
- a9: Limit AF-Area Mode Selection
- a10: Autofocus Mode Restrictions
- a11: Focus Point Wrap-Around
- a12: Focus Point Options
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- g: Movie
- The Setup Menu: Camera Setup
- Format Memory Card
- Language
- Time Zone and Date
- Monitor Brightness
- Monitor Color Balance
- Virtual Horizon
- Information Display
- AF Fine-Tune
- Non-CPU Lens Data
- Clean Image Sensor
- Lock Mirror up for Cleaning
- Image Dust Off Ref Photo
- Image Comment
- Copyright Information
- IPTC
- Voice Memo Options
- Beep
- Touch Controls
- HDMI
- Location Data
- Wireless Remote (WR) Options
- Assign Remote (WR) Fn Button
- Network
- Slot Empty Release Lock
- Battery Info
- Save/Load Settings
- Reset All Settings
- Firmware Version
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
96
Aperture
setting
If Sub-command dial is selected, aperture can only be
adjusted with the sub-command dial (or with the main
command dial if On is selected for Change main/sub >
Exposure setting).
If Aperture ring is selected, aperture can
only be adjusted with the lens aperture ring and the camera
aperture display will show aperture in increments of 1 EV
(aperture for type G and E lenses is still set using the sub-
command dial).
Note that regardless of the setting chosen, the
aperture ring must be used to adjust aperture when a non-CPU
lens is attached.
Menus
and
playback
If Off is selected, the multi selector is used to choose the picture
displayed during full-frame playback, highlight thumbnails,
and navigate menus.
If On or On (image review excluded) is
selected, the main command dial can be used to choose the
picture displayed during full-frame playback, move the cursor
left or right during thumbnail playback, and move the menu
highlight bar up or down.
The sub-command dial is used in
full-frame playback to skip forward or back according to the
option selected for Sub-dial frame advance and in thumbnail
playback to page up or down.
While menus are displayed,
rotating the sub-command dial right displays the sub-menu for
the selected option, while rotating it left displays the previous
menu.
To make a selection, press 2, the center of the multi
selector, or J.
Select On (image review excluded) to prevent
the command dials from being used for playback during image
review.
Sub-dial
frame
advance
When On or On (image review excluded) is selected for
Menus and playback, the sub-command dial can be rotated
during full-frame playback to select a folder, to skip forward or
back 10 or 50 frames at a time, or to skip to the next or previous
protected image, photo, or movie.
Option Description