User's Manual

278
Q
Copying Pictures to the Computer
Before proceeding, be sure you have installed ViewNX-i (0 277).
1 Connect the USB cable.
After turning the camera off and ensuring that a memory card
is inserted, connect the supplied USB cable as shown and then
turn the camera on.
D The USB Cable Clip
To prevent cable from being disconnected, attach the supplied clip
as shown.
D USB Hubs
Connect the camera directly to the computer; do not connect the
cable via a USB hub or keyboard.
A Use a Reliable Power Source
To ensure that data transfer is not interrupted, be sure the camera
battery is fully charged.
A Connecting Cables
Be sure the camera is off when connecting or disconnecting
interface cables.
Do not use force or attempt to insert the
connectors at an angle.