User's Manual

377

Ten-pin remote terminal Can be used to connect optional remote control,

WR-R10 (requires WR-A10 adapter) or WR-1 wireless

remote controller, GP-1/GP-1A GPS unit, or GPS device

compliant with NMEA0183 version 2.01 or 3.01

(requires optional MC-35 GPS adapter cord and cable

with D-sub 9-pin connector)

Ethernet RJ-45 connector

• Standards: IEEE 802.3ab (1000BASE-T)/IEEE 802.3u

(100BASE-TX)/IEEE 802.3 (10BASE-T)

• Data rates: 10/100/1000 Mbps with auto detect

(maximum logical data rates according to IEEE

standard; actual rates may differ)

• Port: 1000BASE-T/100BASE-TX/10BASE-T (AUTO-

MDIX)

Peripheral connector For WT-6, WT-5

Supported languages

Supported languages Arabic, Bengali, Bulgarian, Chinese (Simplified and

Traditional), Czech, Danish, Dutch, English, Finnish,

French, German, Greek, Hindi, Hungarian, Indonesian,

Italian, Japanese, Korean, Marathi, Norwegian, Persian,

Polish, Portuguese (Portugal and Brazil), Romanian,

Russian, Serbian, Spanish, Swedish, Tamil, Telugu, Thai,

Turkish, Ukrainian, Vietnamese

Power source

Battery One rechargeable Li-ion EN-EL18c battery; EN-EL18b,

EN-EL18a, and EN-EL18 batteries can also be used, but

note that fewer pictures can be taken on a single

charge with an EN-EL18 than with an EN-EL18c/

EN-EL18b/EN-EL18a (0 388)

AC adapter EH-6b AC adapter; requires EP-6 power connector

(available separately)

Tripod socket

/4 in. (ISO 1222)

Interface