User's Manual (for customers in Europe)

10
X
8 Choose a language and set the camera
clock.
Use the multi selector and J button to
select a language and set the camera clock.
9 Focus the viewfinder.
After removing the lens cap, rotate the diopter
adjustment control until the AF area brackets are
in sharp focus.
When operating the control with
your eye to the viewfinder, be careful not to put
your fingers or fingernails in your eye.
qwe
Select language Select time zone Select date format
rt Note: The language and
date/time can be changed
at any time using the
Language and Time
zone and date options in
the setup menu (0 66).
Select daylight saving
time option
Set time and date
(note that the camera
uses a 24-hour clock)
A Adjusting Viewfinder Focus
If you are unable to focus the viewfinder as described above, select single-servo autofocus
(AF-S; 0 30), single-point AF (c; 0 32), and the center focus point, and then frame a high-
contrast subject in the center focus point and press the shutter-release button halfway to
focus the camera. With the camera in focus, use the diopter adjustment control to bring the
subject into clear focus in the viewfinder. If necessary, viewfinder focus can be further
adjusted using optional corrective lenses.
Move cursor up
J button: select
highlighted item
Select highlighted
item or display
sub-menu
Move cursor down
AF area brackets