User's Manual (for customers in Europe)

Table Of Contents

D Memory Cards

• Memory cards may be hot after use.

Observe due caution when removing memory cards

from the camera.

• Turn the power off before inserting or removing memory cards.

Do not remove memory

cards from the camera, turn the camera off, or remove or disconnect the power source

during formatting or while data are being recorded, deleted, or copied to a computer.

Failure to observe these precautions could result in loss of data or in damage to the

camera or card.

• Do not touch the card terminals with your fingers or metal objects.

• Do not bend, drop, or subject to strong physical shocks.

• Do not apply force to the card casing.

Failure to observe this precaution could damage

the card.

• Do not expose to water, heat, high levels of humidity, or direct sunlight.

• Do not format memory cards in a computer.

A Removing Memory Cards

After confirming that the memory card access lamp is off,

turn the camera off, open the memory card slot cover, and

press the card in to eject it (q).

The card can then be

removed by hand (w).

A The Write Protect Switch

SD memory cards are equipped with a write protect switch to

prevent accidental loss of data.

When this switch is in the

“lock” position, the memory card can not be formatted and

photos can not be deleted or recorded (a beep will sound if

you attempt to release the shutter).

To unlock the memory

card, slide the switch to the “write” position.

Write-protect switch