User's Manual (for customers in the Americas)
Table Of Contents
- The Reference Manual
- ViewNX 2
- Capture NX-D
- Package Contents
- Quick Start Guide
- Table of Contents
- For Your Safety
- Notices
- Wireless
- Introduction
- “Point-and-Shoot” Modes (Auto and Auto (flash off))
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- Restoring Default Settings
- Wi-Fi
- Camera Menus
- ViewNX 2
- Technical Notes
81
3 Enter the PIN.
Enter the PIN displayed by the smart device.
Press 4 or 2 to
highlight digits and press 1 or 3 to change.
Press J when
entry is complete.
4 Launch the Wireless Mobile Utility.
Launch the Wireless Mobile Utility on the smart device.
The
main dialog will be displayed.
SSID (Android and iOS)
1 Enable the camera’s built-in Wi-Fi.
Highlight Wi-Fi in the setup menu and
press 2.
Highlight Network
connection and press 2, then
highlight Enable and press J.
Wait a
few seconds for Wi-Fi to activate.
2 Display the camera SSID.
Highlight Network settings and
press 2.
Highlight View SSID and press 2.