User's Manual (for customers in the Americas)
Table Of Contents
- The Reference Manual
- ViewNX 2
- Capture NX-D
- Package Contents
- Quick Start Guide
- Table of Contents
- For Your Safety
- Notices
- Wireless
- Introduction
- “Point-and-Shoot” Modes (Auto and Auto (flash off))
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- Restoring Default Settings
- Wi-Fi
- Camera Menus
- ViewNX 2
- Technical Notes
93
Copy Pictures to the Computer
Before proceeding, be sure you have installed ViewNX 2 (0 92).
1 Connect the USB cable.
After turning the camera off and ensuring that a memory
card is inserted, connect the supplied USB cable as shown
and then turn the camera on.
2 Start Nikon Transfer 2 component of ViewNX 2.
If a message is displayed prompting you to choose a
program, select Nikon Transfer 2.
Using ViewNX 2
A Windows 7
If the following dialog is displayed, select Nikon Transfer 2 as
described below.
1 Under Import pictures and videos,
click Change program.
A program
selection dialog will be displayed;
select Import File using Nikon
Transfer 2 and click OK.
2 Double-click Import File.