User's Manual (for customers in the Americas)
Table Of Contents
- The Reference Manual
- ViewNX 2
- Capture NX-D
- Package Contents
- Quick Start Guide
- Table of Contents
- For Your Safety
- Notices
- Wireless
- Introduction
- “Point-and-Shoot” Modes (Auto and Auto (flash off))
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- Restoring Default Settings
- Wi-Fi
- Camera Menus
- ViewNX 2
- Technical Notes
24
Follow the eight steps below to ready the camera for use.
1 Attach the strap.
Attach the strap as shown. Repeat for the second eyelet.
2 Charge the battery.
If a plug adapter is supplied, raise the wall plug and connect
the plug adapter as shown below at left, making sure the
plug is fully inserted.
Insert the battery and plug the charger
in.
An exhausted battery will fully charge in about an hour
and 50 minutes.
First Steps
A The Battery and Charger
Read and follow the warnings and cautions on pages ix–xii and 103–107
of this manual.
Battery charging
Charging complete