User's Manual (for customers in the Americas)
Table Of Contents
- The Reference Manual
- ViewNX 2
- Capture NX-D
- Package Contents
- Quick Start Guide
- Table of Contents
- For Your Safety
- Notices
- Wireless
- Introduction
- “Point-and-Shoot” Modes (Auto and Auto (flash off))
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- Restoring Default Settings
- Wi-Fi
- Camera Menus
- ViewNX 2
- Technical Notes
38
4 Shoot.
Smoothly press the
shutter-release button the
rest of the way down to
take the photograph.
The
memory card access lamp
will light and the
photograph will be
displayed in the monitor
for a few seconds.
Do not
eject the memory card or
remove or disconnect the
power source until the lamp
has gone out and recording
is complete.
A The Shutter-Release Button
The camera has a two-stage shutter-release button.
The camera
focuses when the shutter-release button is pressed halfway.
To take
the photograph, press the shutter-release button the rest of the way
down.
Focus: press halfway Shoot: press all the
way down
Pressing the shutter-release button halfway also ends playback and
readies the camera for immediate use.
Memory card access
lamp