User's Manual
Table Of Contents
- Package Contents
- About This Manual
- Table of Contents
- Menu List
- For Your Safety
- Notices
- Getting to Know the Camera
- First Steps
- Basic Photography and Playback
- Camera Controls
- The MENU Button
- The i Button (the i Menu)
- The info Button
- The Focus-Mode Selector
- The AF-Mode Button
- The AF-ON Button
- The MODE Button
- The Release Mode Dial and Quick Release-Mode Selection Button
- The Metering Button
- The BKT Button
- The ISO (FORMAT) Button
- The Exposure Compensation Button
- The QUAL Button
- The WB Button
- The Protect (Picture Control/Help) Button
- The Thumbnail (Flash Mode) Button
- The Pv Button
- The Fn1, Fn2, Fn3, and Fn (Vertical) Buttons
- Troubleshooting
- Technical Notes
- Camera Displays
- Compatible F Mount Lenses
- Compatible Flash Units
- Other Compatible Accessories
- Software
- Caring for the Camera
- Caring for the Camera and Battery: Cautions
- Exposure Program
- Specifications
- Approved Memory Cards
- Memory Card Capacity
- Battery Endurance
- Location Data (GPS/GLONASS)
- Trademarks and Licenses
- Notices
- Bluetooth and Wi-Fi (Wireless LAN)
- Index
- Warranty Terms - Nikon Europe Service Warranty
194
Compatible Flash Units
D
Metering Areas for FV Lock
The areas metered when FV lock is used with optional flash units are as
follows:
D
Notes on Optional Flash Units
•
Refer to the flash unit manual for detailed instructions.
•
If the unit supports CLS, refer to the section on CLS-compatible digital
SLR cameras. This camera is not included in the “digital SLR” category in
the SB-80DX, SB-28DX, and SB-50DX manuals.
•
If the flash-ready indicator (
N
) flashes for about three seconds after a
photograph is taken in i-TTL or non-TTL auto mode, the flash has fired at
full power and the photograph may be underexposed (CLS-compatible
flash units only).
•
i-TTL flash control can be used at ISO sensitivities between 100 and
12800.
Picture taken with Flash control mode Metered area
Stand-alone flash unit
i-TTL
6-mm circle in center
of frame
Auto aperture (
q
A)
Area metered by flash
exposure meter
Remote flash units
controlled via
Advanced Wireless
Lighting
i-TTL Entire frame
Auto aperture (
q
A)
Area metered by flash
exposure meter
Non-TTL auto (A)