User's Manual
Table Of Contents
- Package Contents
- About This Manual
- Table of Contents
- Menu List
- For Your Safety
- Notices
- Getting to Know the Camera
- First Steps
- Basic Photography and Playback
- Camera Controls
- The MENU Button
- The i Button (the i Menu)
- The info Button
- The Focus-Mode Selector
- The AF-Mode Button
- The AF-ON Button
- The MODE Button
- The Release Mode Dial and Quick Release-Mode Selection Button
- The Metering Button
- The BKT Button
- The ISO (FORMAT) Button
- The Exposure Compensation Button
- The QUAL Button
- The WB Button
- The Protect (Picture Control/Help) Button
- The Thumbnail (Flash Mode) Button
- The Pv Button
- The Fn1, Fn2, Fn3, and Fn (Vertical) Buttons
- Troubleshooting
- Technical Notes
- Camera Displays
- Compatible F Mount Lenses
- Compatible Flash Units
- Other Compatible Accessories
- Software
- Caring for the Camera
- Caring for the Camera and Battery: Cautions
- Exposure Program
- Specifications
- Approved Memory Cards
- Memory Card Capacity
- Battery Endurance
- Location Data (GPS/GLONASS)
- Trademarks and Licenses
- Notices
- Bluetooth and Wi-Fi (Wireless LAN)
- Index
- Warranty Terms - Nikon Europe Service Warranty
197
Compatible Flash Units
•
When an SC-series 17, 28, or 29 sync cable is used for off-camera flash
photography, correct exposure may not be achieved in i-TTL mode. We
recommend that you select standard i-TTL fill-flash. Take a test shot and
view the results in the monitor.
•
In i-TTL, do not use any form of flash panel (diffusion panel) other than
the flash unit’s built-in flash panel or bounce adapters provided with the
flash unit. Using other panels may produce incorrect exposure.
D
Flash Compensation for Optional Flash Units
In i-TTL and auto aperture (
q
A) flash control modes, the flash
compensation selected with the optional flash unit or the [Flash control]
item in the photo shooting menu is added to the flash compensation
selected with the
W
(
M
) button.
A
Modeling Illumination
•
Optional CLS-compatible flash units emit a modeling flash when the
camera Pv button is pressed.
•
This feature can be used with Advanced Wireless Lighting to preview
the total lighting effect achieved with multiple flash units.
•
Modeling illumination can be turned off by selecting [Off] for Custom
Setting e6 [Modeling flash].