User's Manual
Table Of Contents
- Package Contents
- About This Manual
- Table of Contents
- Menu List
- For Your Safety
- Notices
- Getting to Know the Camera
- First Steps
- Basic Photography and Playback
- Camera Controls
- The MENU Button
- The i Button (the i Menu)
- The info Button
- The Focus-Mode Selector
- The AF-Mode Button
- The AF-ON Button
- The MODE Button
- The Release Mode Dial and Quick Release-Mode Selection Button
- The Metering Button
- The BKT Button
- The ISO (FORMAT) Button
- The Exposure Compensation Button
- The QUAL Button
- The WB Button
- The Protect (Picture Control/Help) Button
- The Thumbnail (Flash Mode) Button
- The Pv Button
- The Fn1, Fn2, Fn3, and Fn (Vertical) Buttons
- Troubleshooting
- Technical Notes
- Camera Displays
- Compatible F Mount Lenses
- Compatible Flash Units
- Other Compatible Accessories
- Software
- Caring for the Camera
- Caring for the Camera and Battery: Cautions
- Exposure Program
- Specifications
- Approved Memory Cards
- Memory Card Capacity
- Battery Endurance
- Location Data (GPS/GLONASS)
- Trademarks and Licenses
- Notices
- Bluetooth and Wi-Fi (Wireless LAN)
- Index
- Warranty Terms - Nikon Europe Service Warranty
201
Other Compatible Accessories
●
Wireless Transmitters
1, 2
WT-6 Wireless Transmitters: Use a wireless transmitter to upload
pictures over a wireless network or control the camera from a computer
running Camera Control Pro 2 (available separately). You can also take
and browse pictures remotely from a computer or smart device.
1 Requires a wireless network and some basic network knowledge. Be
sure to update the wireless transmitter software to the latest version.
2 WT-5 wireless transmitters cannot be used.
●
Wireless Remote Controllers
•
WR-R10/WR-T10 Wireless Remote Controllers: When a WR-R10 is
connected to the ten-pin remote terminal using a WR-A10 adapter, the
camera can be controlled remotely using a WR-T10 wireless remote
controller.
- The WR-R10 can also be used to control radio-controlled flash units.
- For synchronized release involving more than one camera, ready
multiple cameras with paired WR-R10 units attached.
•
WR-1 Wireless Remote Controller: WR-1 units are used with WR-R10 or
WR-T10 wireless remote controllers or with other WR-1 remote
controllers, with the WR-1 units functioning as either transmitters or
receivers. When a WR-R10 or a WR-1 configured as a receiver is
connected to the ten-pin remote terminal, a WR-T10 or a second WR-1
configured as a transmitter can be used to take pictures remotely.
Camera settings can also be adjusted using a WR-1 configured as a
transmitter.
* Be sure the firmware for the WR-R10 and WR-1 has been updated to the
latest versions (WR-R10 firmware version 3.0 or later and WR-1 firmware
version 1.0.1 or later). For information on firmware updates, see the
Nikon website for your area. Consult a Nikon-authorized service
representative when updating the firmware for the WR-R10 from
versions prior to version 2.0 to version 3.0 or later.