User's Manual

202
Other Compatible Accessories
●
Remote Terminal Accessories
The camera is equipped with a ten-pin remote terminal for remote
control and automatic photography.
Be sure to replace the terminal cap when the terminal is not in use. Dust
or other foreign matter accumulating in the terminal contacts could cause
the camera to malfunction.
•
MC-22/MC-22A Remote Cords (length approximately 1 m/3.3 ft):
Remote shutter releases with blue, yellow, and black terminals for
connection to remote shutter-triggering devices, allowing control via
sound or electronic signals.
•
MC-30/MC-30A Remote Cords (length approximately 80 cm/2.7 ft):
Remote shutter releases; can be used to reduce camera shake.
•
MC-36/MC-36A Remote Cords (length approximately 85 cm/2.8 ft):
Remote shutter releases with timers for interval-timer photography.
•
MC-21/MC-21A Extension Cords (length approximately 3 m/9.9 ft):
Can be connected to ML-3 or MC-series 20, 22, 22A, 23, 23A, 25, 25A, 30,
30A, 36, or 36A, but note that two or more extensions cords cannot be
connected together.
•
MC-23/MC-23A Connecting Cords (length approximately 40 cm/
1.4 ft): Use an MC-23 or 23A to connect two cameras via their ten-pin
terminals for simultaneous operation.
•
MC-25/MC-25A Adapter Cords (length approximately 20 cm/7.9 in.):
Ten-pin to two-pin adapter cords for connection to devices with two-
pin terminals, including the MW-2 radio control set, MT-2
intervalometer, and ML-2 modulite control set.
•
WR-A10 WR Adapter: An adapter used to connect WR-R10 wireless
remote controllers to cameras with ten-pin remote terminals.
•
ML-3 Modulite Remote Control Set: Allows infrared remote control at
ranges of up to 8 m (26.2 ft).