User's Manual

67
Recording Movies
- Jagged edges, color fringing, moiré, and bright spots in the display
- Bright regions or bands in scenes lit by flashing signs and other
intermittent light sources or when the subject is briefly illuminated by
a strobe or other bright, momentary light source
- Flicker occurring while power aperture is in use
•
Note that noise (randomly-spaced bright pixels, fog, or lines) and
unexpected colors may appear if you use the
X
button to zoom in on
the view through the lens (
0
69) during filming.
•
Movie recording will end automatically if:
- The maximum length is reached
- The live view selector is rotated to another setting
- The lens is removed
•
When recording movies, avoid pointing the camera at the sun or other
strong light sources. Failure to observe this precaution could result in
damage to the camera’s internal circuitry.
•
Sounds made by the camera may be audible in footage recorded:
-During autofocus
- When power aperture is used
- During aperture adjustment
- With vibration reduction enabled on vibration reduction (VR) lenses
•
If the sound level is displayed in red, the volume is too high. Adjust
microphone sensitivity.