Reference Manual

206
Choosing the Operation Performed When the Shutter Is Released (Release Mode)
D
Burst Photography
•
Depending on shooting conditions and memory card performance, the
memory card access lamp may light for anywhere from a few tens of
seconds to around a minute. Do not remove the memory card while the
memory card access lamp is lit. Not only could any unrecorded images
be lost, but the camera or memory card could be damaged.
•
If the camera is switched off while the memory card access lamp is lit, it
will not power off until all images in the buffer have been recorded.
•
If the battery is exhausted while images remain in the buffer, the shutter
release will be disabled and the images transferred to the memory card.