Reference Manual

30
Readying the Camera
•
Insert the battery (terminals first), aligning the end of the
battery with the guide and then sliding the battery in the
direction indicated until it clicks into place.
•
The lamp for the chamber containing the battery (“L” or
“R”) will start to flash as charging begins.
•
Charging is complete when the chamber lamp stops
flashing and the charge lamps turn off.
•
Battery status is shown by the chamber and charge lamps:
Charge state
<50% ≥50%, <80% ≥80%, <100% 100%
Chamber lamp
H
(flashes)
H
(flashes)
H
(flashes)
K
(on)
Charge
lamps
100%
I
(off)
I
(off)
H
(flashes)
I
(off)
80%
I
(off)
H
(flashes)
K
(on)
I
(off)
50%
H
(flashes)
K
(on)
K
(on)
I
(off)