User's Manual
Table Of Contents
- Get SnapBridge Now!
- Package Contents
- Table of Contents
- For Your Safety
- Notices
- Introduction
- First Steps
- Connecting Using SnapBridge
- Tutorial
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Menu List
- Technical Notes
- Compatible Lenses
- Other Accessories
- Caring for the Camera
- Caring for the Camera and Battery: Cautions
- Troubleshooting
- Error Messages
- Specifications
- AF-S DX NIKKOR 18–140mm f/3.5–5.6G ED VR Lenses
- AF-S DX NIKKOR 18–200mm f/3.5–5.6G ED VR II Lenses
- Approved Memory Cards
- Memory Card Capacity
- Battery Life
- Index
- Warranty Terms - Nikon Europe Service Warranty
80
❚❚ Bulb
1 Rotate the mode dial to M.
2 Choose the shutter speed.
While the exposure meters are on, rotate the main command
dial to choose a shutter speed of “Bulb” (A).
3 Take the photograph.
After focusing, press the shutter-release button on the
camera or on the optional wireless remote controller or
remote cord all the way down. Remove your finger from the
shutter-release button when the exposure is complete.
Main command
dial
Control panel Monitor
Mode dial