User's Manual

107
• & Subject-tracking AF: Use the multi
selector to position the focus point over
your subject and press J to start
tracking. The focus point will track the
selected subject as it moves through
the frame. To end tracking, press J
again. Alternatively, you can start
tracking by touching your subject in the monitor; to end
tracking and take a photograph, lift your finger from the
screen. If tracking is already in progress, touching the monitor
anywhere will cause the camera to focus on the current
subject, and a photo will be taken when you lift your finger
from the screen. Note that the camera may be unable to track
subjects if they move quickly, leave the frame or are obscured
by other objects, change visibly in size, color, or brightness, or
are too small, too large, too bright, too dark, or similar in color
or brightness to the background.
A Manual Focus-Point Selection
The multi selector can be used
to select the focus point.
Rotating the focus selector lock
to L disables manual focus-point
selection.
Focus selector lock