User's Manual
Table Of Contents
- Get SnapBridge Now!
- Package Contents
- Table of Contents
- For Your Safety
- Notices
- Introduction
- First Steps
- Connecting Using SnapBridge
- Tutorial
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Menu List
- Technical Notes
- Compatible Lenses
- Other Accessories
- Caring for the Camera
- Caring for the Camera and Battery: Cautions
- Troubleshooting
- Error Messages
- Specifications
- AF-S DX NIKKOR 18–140mm f/3.5–5.6G ED VR Lenses
- AF-S DX NIKKOR 18–200mm f/3.5–5.6G ED VR II Lenses
- Approved Memory Cards
- Memory Card Capacity
- Battery Life
- Index
- Warranty Terms - Nikon Europe Service Warranty
168
At values other than ±0.0, a Y icon will be displayed after you
release the M (Y) button. The current value for flash
compensation can be confirmed by pressing the M (Y) button.
Normal flash output can be restored by setting flash
compensation to ±0.0. Except in SCENE mode, flash
compensation is not reset when the camera is turned off (in
SCENE mode, flash compensation will be reset when another
mode is selected or the camera is turned off).
A See Also
For information on:
• Choosing the size of the increments available for flash compensation,
see A > Custom Setting b2 (EV steps for exposure cntrl, 0 262).
• Choosing whether flash compensation is applied in addition to
exposure compensation when the flash is used, see A > Custom
Setting e3 (Exposure comp. for flash, 0 265).
• Automatically varying flash level over a series of shots, see
“Bracketing” (0 209).