User's Manual

222
❚❚ Canceling Bracketing
To cancel bracketing, press the BKT button and rotate the main
command dial until no shots remain in the bracketing sequence
and the bracketing indicators in the control panel and
viewfinder have turned off. The program last in effect will be
restored the next time bracketing is activated. Bracketing can
also be cancelled by performing a two-button reset (0 206),
although in this case the bracketing program will not be
restored the next time bracketing is activated.
A Zero Shots
The live view display shows “–/–” when no shots remain in the
bracketing sequence.
A ADL Bracketing
In continuous release modes (0 86), shooting will pause after the
number of shots specified in the bracketing program have been taken.
Shooting will resume the next time the shutter-release button is
pressed.
If the memory card fills before all shots in the sequence have been
taken, shooting can be resumed from the next shot in the sequence
after the memory card has been replaced or shots have been deleted
to make room on the memory card. If the camera is turned off before
all shots in the sequence have been taken, bracketing will resume from
the next shot in the sequence when the camera is turned on.