User's Manual
Table Of Contents
- Get SnapBridge Now!
- Package Contents
- Table of Contents
- For Your Safety
- Notices
- Introduction
- First Steps
- Connecting Using SnapBridge
- Tutorial
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Menu List
- Technical Notes
- Compatible Lenses
- Other Accessories
- Caring for the Camera
- Caring for the Camera and Battery: Cautions
- Troubleshooting
- Error Messages
- Specifications
- AF-S DX NIKKOR 18–140mm f/3.5–5.6G ED VR Lenses
- AF-S DX NIKKOR 18–200mm f/3.5–5.6G ED VR II Lenses
- Approved Memory Cards
- Memory Card Capacity
- Battery Life
- Index
- Warranty Terms - Nikon Europe Service Warranty
283
A The Built-in Flash
The built-in flash has a minimum range of 0.6 m (2 ft) and can not be
used in the macro range of macro zoom lenses. It can be used with CPU
lenses with focal lengths of 16–300 mm, although in some cases the
flash may be unable to entirely light the subject at some ranges or
focal lengths due to shadows cast by the lens. The following
illustrations show the effect of vignetting caused by shadows cast by
the lens when the flash is used. Peripheral illumination may drop at
focal lengths under 16 mm.
Shadow Vignetting
Remove lens hoods to prevent shadows. More information on lenses
that can be used with the built-in flash may be found in the camera
Menu Guide, which is available for download from the following
website:
https://downloadcenter.nikonimglib.com/