User's Manual
Table Of Contents
- Get SnapBridge Now!
- Package Contents
- Table of Contents
- For Your Safety
- Notices
- Introduction
- First Steps
- Connecting Using SnapBridge
- Tutorial
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Menu List
- Technical Notes
- Compatible Lenses
- Other Accessories
- Caring for the Camera
- Caring for the Camera and Battery: Cautions
- Troubleshooting
- Error Messages
- Specifications
- AF-S DX NIKKOR 18–140mm f/3.5–5.6G ED VR Lenses
- AF-S DX NIKKOR 18–200mm f/3.5–5.6G ED VR II Lenses
- Approved Memory Cards
- Memory Card Capacity
- Battery Life
- Index
- Warranty Terms - Nikon Europe Service Warranty
291
D Image Sensor Cleaning
Using camera controls during startup interrupts image sensor
cleaning. Image sensor cleaning may not be performed at startup if
the flash is charging.
If dust can not be fully removed using the options in the Clean image
sensor menu, clean the image sensor manually (0 292) or consult a
Nikon-authorized service representative.
If image sensor cleaning is performed several times in succession,
image sensor cleaning may be temporarily disabled to protect the
camera’s internal circuitry. Cleaning can be performed again after a
short wait.