Menu Guide

116 Menu Guide
Change
main/sub
Exposure setting: If Off is selected,
the main command dial controls
shutter speed and the sub-
command dial controls aperture.
If On is selected, the main
command dial will control
aperture and the sub-command
dial shutter speed. If On (Mode A) is selected, the main
command dial will be used to set aperture in shooting
mode A only.
Autofocus setting: If On is selected, autofocus mode can be
selected by keeping the AF-mode button pressed and
rotating the sub-command dial, AF-area mode by keeping
the AF-mode button pressed and rotating the main
command dial.
Menus and
playback
If Off is selected, the multi selector is used to choose the
picture displayed during full-frame playback, highlight
thumbnails, and navigate menus. If On or On (image
review excluded) is selected, the main command dial can
be used to choose the picture displayed during full-frame
playback, move the cursor left or right during thumbnail
playback, and move the menu highlight bar up or down.
The sub-command dial is used in full-frame playback to
skip forward or back according to the option selected for
Sub-dial frame advance and in thumbnail playback to
page up or down. While menus are displayed, rotating the
sub-command dial right displays the sub-menu for the
selected option, while rotating it left displays the previous
menu. To make a selection, press 2 or J. Select On (image
review excluded) to prevent the command dials from
being used for playback during image review.
Sub-dial
frame
advance
When On or On (image review excluded) is selected for
Menus and playback, the sub-command dial can be
rotated during full-frame playback to select a folder, to skip
forward or back 10 or 50 frames at a time, or to skip to the
next or previous protected image, photo, or movie.
Option Description