Reference Manual

Table Of Contents
680
Menu Guide >
B
The Setup Menu
1
Select [Pixel mapping] in the setup menu.
Turn the camera on, press the
G
button, and select [Pixel
mapping] in the setup menu.
2
Select [Start].
Pixel mapping will start.
1
appears in the control panel
while the operation is in progress.
3
Turn the camera off when pixel mapping is
complete.
D
Pixel Mapping
Do not attempt to operate the camera while pixel mapping is in
progress. Do not turn the camera off or remove or disconnect the power
source.
Pixel mapping may not be available if the camera’s internal temperature
is elevated.