Reference Manual

Table Of Contents
393
Connecting to Computers and TVs
D
macOS
If Nikon Transfer 2 does not start automatically, confirm that the camera is
connected and then launch Image Capture (an application that comes
with macOS) and select Nikon Transfer 2 as the application that opens
when the camera is detected.
D
Caution: Transferring Videos
Do not attempt to transfer videos from the memory card while it is
inserted in a camera of a different make or model. Doing so could result in
the videos being deleted without being transferred.
D
Cautions: Connecting to Computers
Do not turn the camera off or disconnect the USB cable while transfer is
in progress.
Do not use force or attempt to insert the connectors at an angle. Be sure
also to keep the connectors straight when disconnecting the cable.
Always turn the camera off before connecting or disconnecting a cable.
To ensure that data transfer is not interrupted, be sure the camera
battery is fully charged.
D
USB Hubs
Connect the camera directly to the computer; do not connect the cable
via a USB hub or keyboard. Connect the camera to a pre-installed USB
port.