Menu Guide

179Menu Guide
Adjust location data settings for use when the camera is
connected to a GPS or smart device.
Location Data
G button ➜ B setup menu
Option Description
Download
from smart
device
Select Ye s to download location data from the smart
device and embed them in pictures taken over the next
two hours (note that the location data feature must be
enabled in the SnapBridge app). If the camera is
connected to both a smart device and a GPS unit,
location data will be downloaded from the GPS unit.
Location data cannot be acquired if the camera is off or
the standby timer has expired.
Position
View the location data supplied by the GPS or smart
device (the items displayed vary with the device).
External GPS
device options
Adjust settings for connection to optional GPS devices.
• Standby timer: Choose whether the standby timer
remains active while a GPS device is connected. If
Enable is selected, the exposure meters will turn off
automatically if no operations are performed for the
period specified in Custom Setting c2 (Standby timer,
0 118), reducing the drain on the battery. If a GP-1 or
GP-1A unit is connected, the unit will remain active for a
set period after the timer expires; to allow the camera
time to acquire location data, the delay is extended by
up to one minute after exposure meters are activated or
the camera is turned on. Select Disable to disable the
standby timer when a GPS device is connected.
• Set clock from satellite: Select Ye s to synchronize the
camera clock with the time reported by the GPS device.