Menu Guide

42 Menu Guide
❚❚ Wireless Flash Options
Adjust settings for simultaneous wireless
control of multiple remote flash units.
This option is available only when an
SB-5000 or SB-500 flash unit or a WR-R10
wireless remote controller is mounted on
the camera.
Option Description
Y
Optical AWL
The remote flash units are controlled using low-
intensity flashes emitted by the master flash.
Available only with an SB-5000 or SB-500
mounted on the camera accessory shoe.
Y/Z
Optical/
radio AWL
This option is for flash photography using both
optically- and radio-controlled flash units. Choose
this option when using both a WR-R10 and an
SB-500 mounted on the camera accessory shoe.
Remote flash control is automatically set to
Group flash (0 43).
Z
Radio AWL
The remote flash units are controlled by radio
signals emitted by a WR-R10 attached to the
camera. Available only with the WR-R10 and
remote flash units that support radio AWL.
Off Remote flash photography disabled.
A The WR-R10
A WR-A10 adapter is required when using the WR-R10. Be sure to
update the WR-R10 firmware to the latest version (version 3.0 or later);
for information on firmware updates, see the Nikon website for your
area.