Menu Guide
Table Of Contents
- Table of Contents
- Menu Guide
- Defaults
- The Playback Menu: Managing Images
- The Photo Shooting Menu: Shooting Options
- Photo Shooting Menu Bank
- Extended Photo Menu Banks
- Storage Folder
- File Naming
- Primary Slot Selection
- Secondary Slot Function
- Flash Control
- Image Area
- Image Quality
- Image Size
- NEF (RAW) Recording
- ISO Sensitivity Settings
- White Balance
- Set Picture Control
- Manage Picture Control
- Color Space
- Active D-Lighting
- Long Exposure NR (Long Exposure Noise Reduction)
- High ISO NR
- Vignette Control
- Auto Distortion Control
- Flicker Reduction
- Auto Bracketing Set
- Multiple Exposure
- HDR (High Dynamic Range)
- Interval Timer Shooting
- Focus Shift Shooting
- Silent Live View Photography
- The Movie Shooting Menu: Movie Shooting Options
- Reset Movie Shooting Menu
- File Naming
- Destination
- Image Area
- Frame Size/Frame Rate
- Movie Quality
- Movie File Type
- ISO Sensitivity Settings
- White Balance
- Set Picture Control
- Manage Picture Control
- Active D-Lighting
- High ISO NR
- Flicker Reduction
- Microphone Sensitivity
- Attenuator
- Frequency Response
- Wind Noise Reduction
- Electronic VR
- Time-Lapse Movie
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- a1: AF-C Priority Selection
- a2: AF-S Priority Selection
- a3: Focus Tracking with Lock-On
- a4: 3D-Tracking Face-Detection
- a5: 3D-Tracking Watch Area
- a6: Number of Focus Points
- a7: Store by Orientation
- a8: AF Activation
- a9: Limit AF-Area Mode Selection
- a10: Autofocus Mode Restrictions
- a11: Focus Point Wrap-Around
- a12: Focus Point Options
- a13: Manual Focus Ring in AF Mode
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- d1: CL Mode Shooting Speed
- d2: Max. Continuous Release
- d3: ISO Display
- d4: Sync. Release Mode Options
- d5: Exposure Delay Mode
- d6: Electronic Front-Curtain Shutter
- d7: File Number Sequence
- d8: Peaking Highlight Color
- d9: Viewfinder Grid Display
- d10: LCD Illumination
- d11: Live View in Continuous Mode
- d12: Optical VR
- e: Bracketing/Flash
- f: Controls
- g: Movie
- The Setup Menu: Camera Setup
- Format Memory Card
- Language
- Time Zone and Date
- Monitor Brightness
- Monitor Color Balance
- Virtual Horizon
- Information Display
- AF Fine-Tune
- Non-CPU Lens Data
- Clean Image Sensor
- Lock Mirror up for Cleaning
- Image Dust Off Ref Photo
- Image Comment
- Copyright Information
- Beep Options
- Touch Controls
- HDMI
- Location Data
- Wireless Remote (WR) Options
- Assign Remote (WR) Fn Button
- Airplane Mode
- Connect to Smart Device
- Send to Smart Device (Auto)
- Wi-Fi
- Bluetooth
- Network
- Eye-Fi Upload
- Conformity Marking
- MB-D18 Battery Type
- Battery Order
- Battery Info
- Slot Empty Release Lock
- Save/Load Settings
- Reset All Settings
- Firmware Version
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Optional Flash Units
- Technical Notes
210 Menu Guide
2 Select the first image.
Use the multi selector to highlight the
first photograph in the overlay. To
view the highlighted photograph full
frame, press and hold the X button. To
view images in other locations, press
W (M) and select the desired card and
folder. Press J to select the highlighted photograph and
return to the preview display.
3 Select the second image.
The selected image will appear as Image 1. Highlight Image
2 and press J, then select the second photo as described in
Step 2.
4 Adjust gain.
Highlight Image 1 or Image 2 and
optimize exposure for the overlay by
pressing 1 or 3 to select the gain
from values between 0.1 and 2.0.
Repeat for the second image. The
default value is 1.0; select 0.5 to halve
gain or 2.0 to double it. The effects of gain are visible in the
Preview column.