Menu Guide
Table Of Contents
- Table of Contents
- Menu Guide
- Defaults
- The Playback Menu: Managing Images
- The Photo Shooting Menu: Shooting Options
- Photo Shooting Menu Bank
- Extended Photo Menu Banks
- Storage Folder
- File Naming
- Primary Slot Selection
- Secondary Slot Function
- Flash Control
- Image Area
- Image Quality
- Image Size
- NEF (RAW) Recording
- ISO Sensitivity Settings
- White Balance
- Set Picture Control
- Manage Picture Control
- Color Space
- Active D-Lighting
- Long Exposure NR (Long Exposure Noise Reduction)
- High ISO NR
- Vignette Control
- Auto Distortion Control
- Flicker Reduction
- Auto Bracketing Set
- Multiple Exposure
- HDR (High Dynamic Range)
- Interval Timer Shooting
- Focus Shift Shooting
- Silent Live View Photography
- The Movie Shooting Menu: Movie Shooting Options
- Reset Movie Shooting Menu
- File Naming
- Destination
- Image Area
- Frame Size/Frame Rate
- Movie Quality
- Movie File Type
- ISO Sensitivity Settings
- White Balance
- Set Picture Control
- Manage Picture Control
- Active D-Lighting
- High ISO NR
- Flicker Reduction
- Microphone Sensitivity
- Attenuator
- Frequency Response
- Wind Noise Reduction
- Electronic VR
- Time-Lapse Movie
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- a1: AF-C Priority Selection
- a2: AF-S Priority Selection
- a3: Focus Tracking with Lock-On
- a4: 3D-Tracking Face-Detection
- a5: 3D-Tracking Watch Area
- a6: Number of Focus Points
- a7: Store by Orientation
- a8: AF Activation
- a9: Limit AF-Area Mode Selection
- a10: Autofocus Mode Restrictions
- a11: Focus Point Wrap-Around
- a12: Focus Point Options
- a13: Manual Focus Ring in AF Mode
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- d1: CL Mode Shooting Speed
- d2: Max. Continuous Release
- d3: ISO Display
- d4: Sync. Release Mode Options
- d5: Exposure Delay Mode
- d6: Electronic Front-Curtain Shutter
- d7: File Number Sequence
- d8: Peaking Highlight Color
- d9: Viewfinder Grid Display
- d10: LCD Illumination
- d11: Live View in Continuous Mode
- d12: Optical VR
- e: Bracketing/Flash
- f: Controls
- g: Movie
- The Setup Menu: Camera Setup
- Format Memory Card
- Language
- Time Zone and Date
- Monitor Brightness
- Monitor Color Balance
- Virtual Horizon
- Information Display
- AF Fine-Tune
- Non-CPU Lens Data
- Clean Image Sensor
- Lock Mirror up for Cleaning
- Image Dust Off Ref Photo
- Image Comment
- Copyright Information
- Beep Options
- Touch Controls
- HDMI
- Location Data
- Wireless Remote (WR) Options
- Assign Remote (WR) Fn Button
- Airplane Mode
- Connect to Smart Device
- Send to Smart Device (Auto)
- Wi-Fi
- Bluetooth
- Network
- Eye-Fi Upload
- Conformity Marking
- MB-D18 Battery Type
- Battery Order
- Battery Info
- Slot Empty Release Lock
- Save/Load Settings
- Reset All Settings
- Firmware Version
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Optional Flash Units
- Technical Notes
43Menu Guide
❚❚ Remote Flash Control
Choose from the following remote flash
photography options.
Option Description
Group flash
Choose a separate flash control mode and flash level for
each group of remote flash units. If Optical AWL or
Optical/radio AWL is selected for Wireless flash options
(0 42), you can choose the channel used by the master
flash to communicate with the remote flash units.
Quick
wireless
control
Choose for control of overall flash output. Use Quick
wireless control options to adjust the balance between
groups A and B and set the output for group C manually
(the master flash does not fire). You can also adjust flash
compensation for groups A and B and, if Optical AWL or
Optical/radio AWL is selected for Wireless flash options
(0 42), choose the channel used by the master flash to
communicate with the remote flash units.
Remote
repeating
The flash units fire repeatedly while the shutter is open,
producing a multiple-exposure effect. Choose the flash
level (Output), the maximum number of times the flash
units fire (Times), the number of times the units fire per
second (Frequency), and, if Optical AWL or Optical/radio
AWL is selected for Wireless flash options (0 42), the
channel used by the master flash to communicate with the
remote flash units. Note that the number of times the flash
units fire in total may vary depending on the options
selected for Output and Frequency; see the
documentation provided with the flash unit for details.