User's Manual

147
A Exposure and Flash Bracketing
In continuous low speed, continuous high speed, and quiet
continuous modes, shooting will pause after the number of shots
specified in the bracketing program have been taken. Shooting will
resume the next time the shutter-release button is pressed.
If the memory card fills before all shots in the sequence have been
taken, shooting can be resumed from the next shot in the sequence
after the memory card has been replaced or shots have been deleted
to make room on the memory card. If the camera is turned off before
all shots in the sequence have been taken, bracketing will resume from
the next shot in the sequence when the camera is turned on.
A Exposure Bracketing
The camera modifies exposure by varying shutter speed and aperture
(programmed auto), aperture (shutter-priority auto), or shutter speed
(aperture-priority auto, manual exposure mode). If On is selected for
ISO sensitivity settings > Auto ISO sensitivity control (0 121) in
modes P, S, and A, the camera will automatically vary ISO sensitivity for
optimum exposure when the limits of the camera exposure system are
exceeded; in mode M, the camera will first use auto ISO sensitivity
control to bring exposure as close as possible to the optimum and then
bracket this exposure by varying shutter speed. Custom Setting e6
(Auto bracketing (mode M), 0 267) can be used to change how the
camera performs exposure and flash bracketing in manual exposure
mode. Bracketing can be performed by varying flash level together
with shutter speed and/or aperture, or by varying flash level alone.