User's Manual

266
d11 Live view in continuous mode (defaults to On)
On Choose whether full-frame playback is
available during burst shooting (release
modes C
L, CH, and QC) in live view (0 37).
If Off is selected, not only the monitor
but also the monitor backlight will turn
off during exposures.
Off
d12 Optical VR (defaults to On)
On Enable or disable vibration reduction on
compatible AF-P lenses not equipped
with a vibration reduction switch.
Off
e Bracketing/flash
e1 Flash sync speed (defaults to 1/250 s)
1/250 s (Auto FP), 1/250 s–1/60 s Choose a flash sync speed.
e2 Flash shutter speed (defaults to 1/60 s)
1/60 s–30 s Choose the slowest shutter available
when the flash is used in modes P and A.
e3 Exposure comp. for flash (defaults to Entire frame)
Entire frame Choose how the camera adjusts flash
level when exposure compensation is
used.
Background only
A Fixing Shutter Speed at the Flash Sync Speed Limit
To fix shutter speed at the sync speed limit in shutter-priority auto or
manual exposure modes, select the next shutter speed after the
slowest possible shutter speed (30 s or %). An X (flash sync indicator)
will be displayed in the viewfinder and control panel.
A Auto FP High-Speed Sync
Auto FP high-speed sync allows the flash to be used at the highest
shutter speed supported by the camera, making it possible to choose
the maximum aperture for reduced depth of field even when the
subject is backlit in bright sunlight. The information display flash
mode indicator shows “FP” when auto FP high-speed sync is active.