User's Manual

341
Exposure mode Programmed auto with flexible program (P);
shutter-priority auto (S); aperture-priority auto
(A); manual (M)
Exposure compensation –5 – +5 EV in increments of
1
/ 3,
1
/ 2, or 1 EV
Exposure lock Luminosity locked at detected value
ISO sensitivity
(Recommended Exposure
Index)
ISO 64 – 25600 in steps of
1
/ 3,
1
/ 2, or 1 EV. Can also
be set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO 32
equivalent) below ISO 64 or to approx. 0.3, 0.5,
0.7, 1, or 2 EV (ISO 102400 equivalent) above
ISO 25600; auto ISO sensitivity control available
Active D-Lighting Can be selected from Auto, Extra high, High,
Normal, Low, or Off
Focus
Autofocus Multi-CAM 20K autofocus sensor module with
TTL phase detection, fine-tuning, and 153 focus
points (including 99 cross-type sensors and 15
sensors that support f/8), of which 55 (35 cross-
type sensors and 9 f/8 sensors) are available for
selection
Detection range –4 – +20 EV (ISO 100, 20 °C/68 °F)
Lens servo • Autofocus (AF): Single-servo AF (AF-S);
continuous-servo AF (AF-C); predictive focus
tracking automatically activated according to
subject status
• Manual focus (M): Electronic rangefinder can be
used
Focus point 153 focus points, of which 55 or 15 are available
for selection
AF-area mode Single-point AF, 9-, 25-, 72-, or 153- point
dynamic-area AF, 3D-tracking, group-area AF,
auto-area AF
Focus lock Focus can be locked by pressing shutter-release
button halfway (single-servo AF) or by pressing
the center of the sub-selector
Exposure