User manual

89
d
❚❚ Camera Controls
1 Assign image area selection to a camera control.
Select Choose image area as the “press + command dials”
option for a camera control in the Custom Settings menu
(0 332).
Image area selection can be assigned to the Fn
button (Custom Setting f3, Assign Fn button, 0 328), the Pv
button (Custom Setting f4, Assign preview button, 0 333),
the center of the sub-selector (Custom Setting f6, Assign sub-
selector center, 0 333), or the movie-record button (Custom
Setting f16, Assign movie record button, 0 339).
2 Use the selected control to choose an image area.
The image area can be
selected by pressing the
selected control and rotating
the main or sub-command
dial until the desired crop is
displayed in the viewfinder
(0 87).
The option currently selected
for image area can be viewed by
pressing the control to display the image
area in the top control panel or
information display.
FX format is
displayed as “36 × 24”, 1.2 × as “30 × 20”,
DX format as “24 × 16”, and 5 : 4 as
“30 × 24”.
Main
command dial
Fn button