User manual
Table Of Contents
- Q&A Index
- For Your Safety
- Notices
- Quick Start Guide
- Introduction
- Tutorial
- Live View Photography
- Movie Live View
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More About Playback
- Voice Memos
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- f1: Multi Selector Center Button
- f2: Multi Selector
- f3: Assign Fn Button
- f4: Assign Preview Button
- f5: Assign Sub-selector
- f6: Assign Sub-selector Center
- f7: Assign Fn Button (Vert.)
- f8: Shutter Spd & Aperture Lock
- f9: Assign BKT Button
- f10: Customize Command Dials
- f11: Release Button to Use Dial
- f12: Slot Empty Release Lock
- f13: Reverse Indicators
- f14: Assign Multi Selector (Vert.)
- f15: Playback Zoom
- f16: Assign Movie Record Button
- g: Movie
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes

106
N
AF-S focus mode: Focus locks automatically when the in-focus
indicator appears, and remain locked until you remove your
finger from the shutter-release button.
Focus can also be
locked by pressing the center of the sub-selector (see above).
3 Recompose the photograph
and shoot.
Focus will remain locked
between shots if you keep the
shutter-release button pressed
halfway (AF-S) or keep the center of the sub-selector pressed,
allowing several photographs in succession to be taken at the
same focus setting.
Do not change the distance between the camera and the subject
while focus lock is in effect.
If the subject moves, focus again at the
new distance.
A See Also
See Custom setting c1 (Shutter-release button AE-L, 0 316) for
information on using the shutter-release button to lock exposure,
Custom Setting f6 (Assign sub-selector center, 0 333) for information
on choosing the role played by the center of the sub-selector.