User manual
Table Of Contents
- Q&A Index
- For Your Safety
- Notices
- Quick Start Guide
- Introduction
- Tutorial
- Live View Photography
- Movie Live View
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More About Playback
- Voice Memos
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- f1: Multi Selector Center Button
- f2: Multi Selector
- f3: Assign Fn Button
- f4: Assign Preview Button
- f5: Assign Sub-selector
- f6: Assign Sub-selector Center
- f7: Assign Fn Button (Vert.)
- f8: Shutter Spd & Aperture Lock
- f9: Assign BKT Button
- f10: Customize Command Dials
- f11: Release Button to Use Dial
- f12: Slot Empty Release Lock
- f13: Reverse Indicators
- f14: Assign Multi Selector (Vert.)
- f15: Playback Zoom
- f16: Assign Movie Record Button
- g: Movie
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
S
117
S
ISO Sensitivity
“ISO sensitivity” is the digital equivalent of film speed. Choose
from settings that range from ISO 100 and ISO 12800 in steps
equivalent to
1
/3 EV. Settings of from about 0.3 to 1 EV below ISO
100 and 0.3 to 4 EV above ISO 12800 are also available for special
situations. The higher the ISO sensitivity, the less light needed to
make an exposure, allowing higher shutter speeds or smaller
apertures.
ISO sensitivity can be adjusted
by pressing the S button and
rotating the main command
dial until the desired setting is
displayed in the control panels
or viewfinder.
Manual Adjustment
S button Main command
dial
Top control panel Rear control panel Viewfinder