User manual

194
l
A Auto Aperture/Non-TTL Auto
Unless the focal length and maximum aperture are specified using the
Non-CPU lens data option in the setup menu (0 229), choosing auto
aperture (AA) when a non-CPU lens is attached automatically selects
non-TTL auto (A).
A Modeling Illumination
CLS-compatible flash units such as the SB-910, SB-900, SB-800, SB-700,
and SB-600 emit a modeling flash when the camera Pv button is
pressed. This feature can be used with Advanced Wireless Lighting to
preview the total lighting effect achieved with multiple flash units.
Modeling illumination can be turned off using Custom Setting e5
Modeling flash (0 325).
A Other Flash Units
The following flash units can be used in non-TTL auto and manual
modes.
Flash unit SB-80DX,
SB-28DX,
SB-28, SB-26,
SB-25, SB-24
SB-50DX
SB-30, SB-27
1
,
SB-22S, SB-22,
SB-20,
SB-16B, SB-15
SB-23, SB-29
2
,
SB-21B
2
,
SB-29S
2
Flash mode
A Non-TTL auto ✔ — ✔ —
M Manual ✔✔✔ ✔
G Repeating flash ✔ —— —
REAR
3
Rear-curtain sync ✔✔✔ ✔
1 Flash mode is automatically set to TTL and shutter-release is disabled. Set flash
unit to A (non-TTL auto flash).
2 Autofocus is available with AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED and AF-S
Micro NIKKOR 60mm f/2.8G ED lenses only.
3 Available when camera is used to select flash mode.