User manual
Table Of Contents
- Q&A Index
- For Your Safety
- Notices
- Quick Start Guide
- Introduction
- Tutorial
- Live View Photography
- Movie Live View
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More About Playback
- Voice Memos
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- f1: Multi Selector Center Button
- f2: Multi Selector
- f3: Assign Fn Button
- f4: Assign Preview Button
- f5: Assign Sub-selector
- f6: Assign Sub-selector Center
- f7: Assign Fn Button (Vert.)
- f8: Shutter Spd & Aperture Lock
- f9: Assign BKT Button
- f10: Customize Command Dials
- f11: Release Button to Use Dial
- f12: Slot Empty Release Lock
- f13: Reverse Indicators
- f14: Assign Multi Selector (Vert.)
- f15: Playback Zoom
- f16: Assign Movie Record Button
- g: Movie
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
232
t
❚❚ Other GPS Units
Garmin GPS units that conform to version 2.01 or 3.01 of the
National Marine Electronics Association NMEA0183 data format
can be connected to the camera’s ten-pin remote terminal using
an MC-35 GPS adapter cord (available separately; 0 394).
Operation has been confirmed with Garmin eTrex and Garmin
geko series devices equipped with a PC interface cable connector.
These devices connect to the MC-35 using a cable with a D-sub
9-pin connector provided by the manufacturer of the GPS device.
See the MC-35 instruction manual for details.
Before turning the
camera on, set the GPS device to NMEA mode (4800 baud); see the
documentation provided with the GPS device for more
information.
MC-35