User manual
Table Of Contents
- Q&A Index
- For Your Safety
- Notices
- Quick Start Guide
- Introduction
- Tutorial
- Live View Photography
- Movie Live View
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More About Playback
- Voice Memos
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- f1: Multi Selector Center Button
- f2: Multi Selector
- f3: Assign Fn Button
- f4: Assign Preview Button
- f5: Assign Sub-selector
- f6: Assign Sub-selector Center
- f7: Assign Fn Button (Vert.)
- f8: Shutter Spd & Aperture Lock
- f9: Assign BKT Button
- f10: Customize Command Dials
- f11: Release Button to Use Dial
- f12: Slot Empty Release Lock
- f13: Reverse Indicators
- f14: Assign Multi Selector (Vert.)
- f15: Playback Zoom
- f16: Assign Movie Record Button
- g: Movie
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
282
Q
A Television Playback
Use of an EH-6b AC adapter and EP-6 power connector (available
separately) is recommended for extended playback.
Note that the
edges may not be visible when photographs are viewed on a television
screen.
A Voice Memo Options > Audio Output (0 261)
Set HDMI to play back voice memos on the HDMI device.
A Slide Shows
The Slide show option in the playback menu can be used for
automated playback (0 291).
A Audio
Stereo sound recorded with optional ME-1 (0 395) stereo microphones
plays in stereo when movies are viewed on HDMI devices using a
camera connected via an HDMI cable (note that audio will not be played
back over headphones connected to the camera).
Volume can be
adjusted using television controls; the camera controls can not be used.
A HDMI and Live View
When the camera is connected via an HDMI cable, HDMI displays can be
used for live view photography and movie live view (0 61, 70).
During
movie live view and movie recording, HDMI output will be adjusted
according to the option selected for Movie settings > Frame size/
frame rate in the shooting menu (0 74).
Note that some HDMI devices
may not support the selected setting; in this case, select 1080i
(interlaced) for HDMI > Output resolution (0 281).
Movies may be
output at a frame size smaller than that selected for Frame size/frame
rate (0 74).