User manual
Table Of Contents
- Q&A Index
- For Your Safety
- Notices
- Quick Start Guide
- Introduction
- Tutorial
- Live View Photography
- Movie Live View
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More About Playback
- Voice Memos
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- f1: Multi Selector Center Button
- f2: Multi Selector
- f3: Assign Fn Button
- f4: Assign Preview Button
- f5: Assign Sub-selector
- f6: Assign Sub-selector Center
- f7: Assign Fn Button (Vert.)
- f8: Shutter Spd & Aperture Lock
- f9: Assign BKT Button
- f10: Customize Command Dials
- f11: Release Button to Use Dial
- f12: Slot Empty Release Lock
- f13: Reverse Indicators
- f14: Assign Multi Selector (Vert.)
- f15: Playback Zoom
- f16: Assign Movie Record Button
- g: Movie
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes

324
U
This option determines the slowest shutter
speed available when using front- or rear-
curtain sync or red-eye reduction in
programmed auto or aperture-priority auto
exposure modes (regardless of the setting
chosen, shutter speeds can be as slow as 30 s
in shutter-priority auto and manual exposure modes or at flash
settings of slow sync, slow rear-curtain sync, or red-eye reduction
with slow sync).
Options range from
1
/60 s (1/60 s) to 30 s (30 s).
Choose a flash control mode for optional SB-400 flash units.
e2: Flash Shutter Speed
G button ➜ A Custom Settings menu
e3: Optional Flash
G button ➜ A Custom Settings menu
Option Description
r TTL
Flash output is adjusted automatically in response to
shooting conditions (0 198).
s Manual
Choose a flash level between Full and 1/128 (
1
/128 of full
power). Monitor pre-flashes are not emitted.
A Flash Control Mode
The flash control mode is shown in the
information display (0 14, 197).