User manual
Table Of Contents
- Q&A Index
- For Your Safety
- Notices
- Quick Start Guide
- Introduction
- Tutorial
- Live View Photography
- Movie Live View
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More About Playback
- Voice Memos
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- f1: Multi Selector Center Button
- f2: Multi Selector
- f3: Assign Fn Button
- f4: Assign Preview Button
- f5: Assign Sub-selector
- f6: Assign Sub-selector Center
- f7: Assign Fn Button (Vert.)
- f8: Shutter Spd & Aperture Lock
- f9: Assign BKT Button
- f10: Customize Command Dials
- f11: Release Button to Use Dial
- f12: Slot Empty Release Lock
- f13: Reverse Indicators
- f14: Assign Multi Selector (Vert.)
- f15: Playback Zoom
- f16: Assign Movie Record Button
- g: Movie
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes

391
n
Other Accessories
At the time of writing, the following accessories were available for
the D4.
Power sources
• Rechargeable Li-ion Battery EN-EL18 (0 23, 25): Additional
EN-EL18 batteries are available from local retailers and
Nikon service representatives.
These batteries can be
recharged and calibrated using an MH-26 battery charger.
• Battery Charger MH-26 (0 23, 440): The MH-26 can be used to
recharge and calibrate EN-EL18 batteries.
• Power Connector EP-6, AC Adapter EH-6b: These accessories can
be used to power the camera for extended periods (EH-6
AC adapters can also be used).
The EP-6 is required to
connect the EH-6b to the camera; see page 396 for details.
Wireless LAN
adapters
(0 269)
• Wireless Transmitter WT-4: Connects the camera to wireless
and Ethernet networks.
The photographs on the camera
memory card can be viewed by computers on the same
network or copied to a computer for long-term storage.
The camera can also be controlled from any computer on
the network using Camera Control Pro 2 (available
separately).
Note that the WT-4 requires an independent
power source in the form of an optional EH-6b AC adapter
or EN-EL3e battery.
See the WT-4 manual for details.
• Wireless Transmitter WT-5:Connect the WT-5 to the camera’s
peripheral connector to upload pictures over a wireless
network, to control the camera from a computer running
Camera Control Pro 2 (available separately), or to take and
browse pictures remotely from a computer or iPhone.
See
the WT-5 manual for details.
Note: A wireless network and some basic network knowledge is
required when using a wireless transmitter.
Be sure to upgrade
the software supplied with the wireless transmitter to the
latest version.