User manual

25
s
Insert the Battery
1 Turn the camera off.
2 Remove the battery-chamber cover.
Lift the battery-chamber cover latch, turn it
to the open (
A ) position ( q ) and remove
the BL-6 battery-chamber cover (
w ).
3 Attach the cover to the battery.
If the battery release is positioned so that
the arrow (4) is visible, slide the battery
release to cover the arrow.
Insert the two
projections on the battery into the
matching slots in the cover and slide the
battery release to completely reveal the
arrow.
D Inserting and Removing
Batteries
Always turn the camera off
before inserting or removing
batteries.
D The BL-6 Battery-Chamber Cover
The battery can be charged with the BL-6 attached. To prevent dust
from accumulating inside the battery chamber when the battery is not
inserted, slide the battery release in the direction indicated by the arrow
(4), remove the BL-6 from the battery, and replace it on the camera.
Other battery covers can not be used with this camera.