User's Manual
Table Of Contents
- En
- Fr
- Documentation relative au produit
- Mesures de sécurité
- Avertissements
- Table des matières
- Avant de commencer
- Confi guration
- Bases de la numérisation
- Etape 1 — Mettre le scanner sous tension
- Etape 2 — Insérer le fi lm dans le porte-fi lm
- Etape 3 — Ouvrir la fenêtre de numérisation
- Etape 4 — Insérer le porte-fi lm
- Etape 5 — Choisir un type de fi lm et un mode couleur
- Etape 6 — Créer un aperçu (prévisualiser)
- Etape 7 — Effectuer un recadrage
- Etape 8 — Numériser et enregistrer
- Etape 9 — Ejecter et quitter
- Nikon Scan
- Porte-fi lms optionnels
- Remarques techniques
- Index

69
5
Click Next
The dialog shown at right will be dis-
played. Click Next.
The “Insert Disk” Dialog
If the “Insert Disk” dialog is displayed,
insert the Windows 98 Second Edition
CD and click OK. If Windows displays a
message stating that a fi le could not be
found, enter the drive letter of the CD-
ROM drive followed by “\win98_se”
(e.g., “d:\win98_se”) in the Copy fi les
from text box and click OK.
6
Click Finish
The dialog shown at right will be dis-
played. Click Finish.
7
Open the “System Properties” dialog
After the computer restarts, click the My
Computer icon with the right mouse
button and select Properties from the
menu that appears.
8
Check the IEEE 1394 host controller
Click the Device Manager tab and con-
fi rm that “NEC Firewarden OHCI Com-
pliant IEEE 1394 Host Controller” is listed
under “1394 Bus Controller.”