User Manual

30
Ru
Se
Nl
Dk
Pl
Hu
Cz
Fi
No
En
De
Fr
Es
It
Ro
31
Ru
Se
Nl
Dk
Pl
Hu
Cz
Fi
No
En
De
Fr
Es
It
Ro
Troubleshooting/Repair
If your Nikon Laser Forestry Pro should require repair, please contact your local dealer for details regarding
where to send it. Before doing so, you are advised to consult the Troubleshooting Table below.
Symptom Check Points
Unit does not turn
on—LCDfailsto
illuminate
Target range cannot
be obtained
[- - -] (“Cannot
measure”) appears
Closer target cannot
be measured
Target beyond a
certain distance
cannot be measured
•DepressPOWERbutton.
•Checkandreplacebatteriesifnecessary.
•Besurethatnothing,suchasyourhandorfinger,is
blocking the laser emission aperture and laser detector.
•Besurethatthelaseremissionapertureandlaserdetector
are clean. Clean them if necessary.
•Besurethatthetargetshapeandconditionisappropriate
to reflect the laser beam.
•Replacebattery.
•Besuretoholdtheunitsteadywhiledepressingthe
POWERbutton.
•Besurethetargetiswithinmeasuringrange(10-500m/11-
550 yards/33-999 feet)
•Besurethatnothing,suchasleavesorgrass,isbetween
the Nikon Laser Forestry Pro and the target.
•Besurethatnothing,suchasleavesorgrass,isbetween
the Nikon Laser Forestry Pro and the target.
If problems persist after consulting the Troubleshooting Table, please contact your local dealer to check/repair the Nikon
Laser Forestry Pro. Never let anyone than the official representative of the product manufacturer check or repair the Nikon
Laser Forestry Pro. Failure to follow this instruction could result in injury, or damage to the product.
Symptom Check Points
Measurementresultis
unstable
Incorrect result is
displayed
•Replacebattery.
•Besurethatthetargetshapeandconditionisappropriate
to reflect the laser beam.
•Besuretoholdtheunitsteadywhiledepressingthe
POWERbutton.
•Besurethatnothing,suchasleavesorgrass,isbetween
the Nikon Laser Forestry Pro and the target.
•Replacebattery.
•Besurethatthetargetshapeandconditionisappropriate
to reflect the laser beam.
•Besurethatnothing,suchasleavesorgrass,isbetween
the Nikon Laser Forestry Pro and the target.