Product Manual
Table Of Contents
- Nikon N Series/K Series Total Station Instruction Manual
- Legal Notices
- Safety
- Introduction
- Preparation
- Unpacking and Packing the Instrument
- Charging the Battery Pack
- Detaching and Re-Attaching the Battery Pack
- Setting Up the Tripod
- Centering
- Leveling
- Sighting
- Setting the Measurement Mode and Preparing the Target
- Measurement in Reflectorless Mode (N 2" and N 5" only)
- Setting Up the Prism Reflector
- Face-1/Face-2 Measurement
- External Device Connector
- Getting Started
- Applications
- HA Reset and Angle Operations
- Station Setup
- Setting up a station with known coordinates or azimuth
- Setting up a station using multiple point resection
- Setting up the station quickly without coordinates
- Determining station elevation
- Checking and resetting the backsight direction
- Base XYZ function
- Two-point resection along a known line
- Setting up a station for traverse measurement
- Use last
- Stakeout
- Program Key
- Recording Measurement Data
- Measuring Offsets
- Menu Key
- Checking and Adjustment
- System Diagrams
- Communications
- Error Messages
Nikon N Series/K Series Total Station Instruction Manual 99
Menu Key 5
Creating a new job
1. Press the Creat softkey in the job list.
2. Enter a job name of up to eight characters. Press
[ENT].
3. Do one of the following:
– To check the job settings, press the Sett
softkey.
– To create a new job using the current job
settings, press
[ENT] or the OK softkey.
Job settings
The following settings are set when a job is created, and cannot be changed. This
ensures that the data in a job is correctly stored in the database, and that all necessary
corrections are applied when you store each record..
Scale Factor 0.999600 to 1.000400
T-P correction ON/OFF
Sea Level ON/OFF
C&R correction OFF/0.132/0.200
Angle unit DEG/GON/MIL
Distance unit Metre/US-Ft/I-Ft
Temp unit °C/°F
Press unit hPa/mmHg/inHg
If you select US-Ft or I-Ft, an additional settings screen appears. Use this
screen to specify whether to display values in Decimal-Ft or Ft-Inch.
VA zero Zenith/Horizon/Compass
AZ zero North/South
Order NEZ/ENZ
HA Azimuth/0 to BS