Product Manual
Table Of Contents
- Nikon N Series/K Series Total Station Instruction Manual
- Legal Notices
- Safety
- Introduction
- Preparation
- Unpacking and Packing the Instrument
- Charging the Battery Pack
- Detaching and Re-Attaching the Battery Pack
- Setting Up the Tripod
- Centering
- Leveling
- Sighting
- Setting the Measurement Mode and Preparing the Target
- Measurement in Reflectorless Mode (N 2" and N 5" only)
- Setting Up the Prism Reflector
- Face-1/Face-2 Measurement
- External Device Connector
- Getting Started
- Applications
- HA Reset and Angle Operations
- Station Setup
- Setting up a station with known coordinates or azimuth
- Setting up a station using multiple point resection
- Setting up the station quickly without coordinates
- Determining station elevation
- Checking and resetting the backsight direction
- Base XYZ function
- Two-point resection along a known line
- Setting up a station for traverse measurement
- Use last
- Stakeout
- Program Key
- Recording Measurement Data
- Measuring Offsets
- Menu Key
- Checking and Adjustment
- System Diagrams
- Communications
- Error Messages
5 Menu Key
114 Nikon N Series/K Series Total Station Instruction Manual
4. Enter the distance from P2.
– To define the distance (HD) by two points,
press the
Pts softkey.
– To calculate the coordinates of the
intersection point, press
[ENT] in the HD
field.
5. If there are two results, the first solution appears
graphically relative to the P1-P2 line. To display
the second solution, press
[<] or [>].
6. To record the point, press
[ENT] when the required
solution appears.
7. Enter a Z coordinate if necessary.
8. To move to the PT and CD fields, press
[ENT].
Sample records
CO,Int BD P1:4672 AZ:330.54175+0.00000
CO, P2:71 HD:100.0000
CC,504,,-839.3065,347.6682,,SIGN
Calculating a distance-distance intersection
1. Press
[3] or select Dist-Dist in the Intersection menu.
2. Enter the first point name and press
[ENT], or
press the
MsrPT softkey to measure directly to
the point.
3. Enter the distance from P1 and press
[ENT].
4. To define the distance (HD) by two points, press
the
Pts softkey.
5. Enter P2 and the distance from P2 (HD).
6. To calculate the coordinates of the intersection
point, press
[ENT] in the HD field.