Product Manual
Table Of Contents
- Nikon N Series/K Series Total Station Instruction Manual
- Legal Notices
- Safety
- Introduction
- Preparation
- Unpacking and Packing the Instrument
- Charging the Battery Pack
- Detaching and Re-Attaching the Battery Pack
- Setting Up the Tripod
- Centering
- Leveling
- Sighting
- Setting the Measurement Mode and Preparing the Target
- Measurement in Reflectorless Mode (N 2" and N 5" only)
- Setting Up the Prism Reflector
- Face-1/Face-2 Measurement
- External Device Connector
- Getting Started
- Applications
- HA Reset and Angle Operations
- Station Setup
- Setting up a station with known coordinates or azimuth
- Setting up a station using multiple point resection
- Setting up the station quickly without coordinates
- Determining station elevation
- Checking and resetting the backsight direction
- Base XYZ function
- Two-point resection along a known line
- Setting up a station for traverse measurement
- Use last
- Stakeout
- Program Key
- Recording Measurement Data
- Measuring Offsets
- Menu Key
- Checking and Adjustment
- System Diagrams
- Communications
- Error Messages
8 Communications
166 Nikon N Series/K Series Total Station Instruction Manual
Job identifier record
Note record
10NM jobid 1 incZ T&Pcorr C&Rcorr refcon sealev
1–4 10NM Job identifier record ID (fixed text)
5–8 (2x),
5–20 (33)
jobid Job name/title
Note – The following fields occur only in SDR33
format.
21 1 Point ID length option
22 incZ 2D or 3D coordinates. One of the following:
1 2D
2 3D
23
T&Pcorr Atmospheric correction. One of the following:
1 Off
2 On
24
C&Rcorr Curvature and refraction correction. One of the
following:
1 Off
2 On
25
refcon Refraction constant. One of the following:
1 0.132
2 0.200
26
sealev Sea level correction. One of the following:
1 Off
2 On
13NM note
1–4 13NM Note record ID (fixed text)
5–64 note Note text