Product Manual
Table Of Contents
- Nikon N Series/K Series Total Station Instruction Manual
- Legal Notices
- Safety
- Introduction
- Preparation
- Unpacking and Packing the Instrument
- Charging the Battery Pack
- Detaching and Re-Attaching the Battery Pack
- Setting Up the Tripod
- Centering
- Leveling
- Sighting
- Setting the Measurement Mode and Preparing the Target
- Measurement in Reflectorless Mode (N 2" and N 5" only)
- Setting Up the Prism Reflector
- Face-1/Face-2 Measurement
- External Device Connector
- Getting Started
- Applications
- HA Reset and Angle Operations
- Station Setup
- Setting up a station with known coordinates or azimuth
- Setting up a station using multiple point resection
- Setting up the station quickly without coordinates
- Determining station elevation
- Checking and resetting the backsight direction
- Base XYZ function
- Two-point resection along a known line
- Setting up a station for traverse measurement
- Use last
- Stakeout
- Program Key
- Recording Measurement Data
- Measuring Offsets
- Menu Key
- Checking and Adjustment
- System Diagrams
- Communications
- Error Messages
Nikon N Series/K Series Total Station Instruction Manual 3
Introduction 1
Parts of the Instrument
Figure 1.1 and Figure 1.2 show the main parts of the instrument.
Figure 1.1
Telescope
Telescope
Diopter ring
Vertical tangent
Vertical clamp
Horizontal
screw
tangent screw
focusing ring
eyepiece
Face-1 display /
Carrying handle
Optical sight
(Finder)
Reticle plate cover
CFR label is attached here.
Tribrach clamp knob
Horizontal clamp
FCC label is attached here.
Battery case
mounting button
Keyboard
Nikon N Series/K Series --- Face-1
(Carrying hanndle
doesn’t interfere
with the zenith
measurement.)