Quick Start Guide

Getting Started

Setup from a Smartphone or Tablet

Here, pairing refers to the setting used to connect the camera and smartphone or

tablet (below, “smart device”) through Bluetooth.

Camera

• Insert a microSD memory card with sufficient free space into the camera.

• Check that the battery is sufficiently charged so that the camera does not turn off

during the procedure.

Smart device

• Two apps are available: “SnapBridge” and “SnapBridge 360/170”.

Use “SnapBridge 360/170” when pairing your device with this

camera.

• Do not pair from the Bluetooth setting screen of the smart

device.

1 Check that the camera is off (the screen is off).

• To turn off the camera, press and hold the movie button for at least three seconds.

See “Turning the Camera On or Off” (A5) for more information.

2 Enable Bluetooth and Wi-Fi on the smart device.

• If you are using NFC, enable the NFC setting on the smart device.

3 Install the SnapBridge 360/170 app.

• After installing the SnapBridge 360/170 app, close all apps that use NFC (including

the SnapBridge 360/170 app). Pairing may fail if apps that use NFC are running.

4 Press the movie button or photo button to turn on the camera.

• A language selection dialog will be displayed. Press H or I on the back side of the

camera to highlight a language and press k to select.

C Videos on How to Use the SnapBridge 360/170 App

Videos in the website below easily explain how to use the SnapBridge 360/170 app for

pairing and basic operations.

http://imaging.nikon.com/lineup/action/keymission_170/index.htm#movie

Camera Setup