Operation Manual

Advanced Operations22
To automatically fire the flash
Auto Flash mode
The flash automatically fires when there is not enough
light or the subject is dark.
1.
Open the slide cover
When you open the slide cover, the power is turned on and
the built-in flash automatically pops up.
2.
Check that the orange and green LEDs
light up, then shoot.
If there is enough light, “ ” appears on the LCD panel, and
the flash does not fire.
While the orange LED is blinking with the Shutter Release
button pressed lightly, the flash is charging, and the shutter
cannot be released. Release the shutter after the orange LED
lights up.
Pressing down on the popped-up flash unit will prevent the
flash from firing. Do NOT touch the flash unit.
Example