N65 & N65 QD Camera Manual

, •••••••••••••
------ -- --- -- - --- - -- -----------
Turn the power switch on and load DX-coded film. With DX-coded film,
film speed will be set automatically (ISO 25-5000). Closing the camera
back after loading film automatically advances the film to the first frame .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .
Turn the power switch on, open the
camera back by sliding the camera back
lock release lever and load film.
• Film cartridge can be loaded smoothly if inserted
from the bottom.
2 Pull film leader across to red index mark .
• Do not insert the film leader beyond the red index
mark .
• Hold the film cartridge and ensure film is properly
positioned with no slack.
NOTE: Loading/removing film
20
Shutter curtains are very thin. Do not touch the shutter
curtains with your finger
or the film leader.